{"id":646,"date":"2023-07-01T10:46:58","date_gmt":"2023-07-01T10:46:58","guid":{"rendered":"https:\/\/kanakydesign.com\/?post_type=product&p=646"},"modified":"2026-02-08T00:33:26","modified_gmt":"2026-02-08T00:33:26","slug":"tubo","status":"publish","type":"product","link":"https:\/\/kanakydesign.com\/en\/product\/tubo\/","title":{"rendered":"Tube"},"content":{"rendered":"

The tubes for terrarium rain system<\/strong> are the basic component for assembling, expanding or renovating any spray installation. Choosing the correct diameter is key to maintaining pressure, avoiding leaks and achieving a fine and constant spray at the nozzles. In this option you can select the meters<\/strong> you need depending on your set-up: a single terrarium, several connected terrariums or a larger installation with a professional pump.<\/p>\n

\u2705 Which tubing do you need depending on the system?<\/h2>\n

These tubes are used depending on the pump and the section of the circuit:<\/p>\n

\ud83d\udd39 4mm tubing (pump \u2192 nozzles).<\/h3>\n

The 4mm tube<\/strong> is used to connect the pump to the nozzles in more compact rainfall systems, especially in typical ULKA pump configurations. It is the usual diameter in the last sections of the circuit, close to the spraying.<\/p>\n

\ud83d\udd39 Pipe 8mm (tank \u2192 pump).<\/h3>\n

The 8mm tube<\/strong> connect the water tank<\/strong> with the pump. It is an important section because it feeds the system inlet: a stable suction helps the pump to work better and avoids performance losses.<\/p>\n

\ud83d\udd39 6mm tube and 10mm tube (diaphragm pump system)<\/h3>\n

In rainfall systems with diaphragm pump<\/strong> (more professional category), are normally used:<\/p>\n