Spray toe

The sprinkler tips for terrarium rain system nozzles are the perfect replacement when a nozzle clogs and you don't want (or need) to replace the entire assembly. With use, it is normal for some nozzles to accumulate scale or sediment, especially if the water is hard. In many cases, the problem is concentrated on the toe, The new sprayer is the fastest and most economical way to regain a fine, even spray pattern.

The substitution is simple: all you have to do is unscrew the toe cap of the main part (the part gray) and place the new one. This way you keep the system running with good pressure and no loss of performance, which is key in tropical, bioactive and paludariums where stable humidity makes all the difference.

✅ Quick replacement without replacing the entire nozzle

You are at sprinkler headers terrarium rain system allow you to:

• repair a clogged nozzle in minutes

• saving, reusing the main body

• maintaining fine spray on all lines

• have spare parts ready for preventive maintenance

🌧️ Two spray degrees: 80º or 120º.

Choose the angle according to your assembly and nozzle distribution:

⚪ 80° (white) - longer range, narrower arc

The 80º toe caps generate a narrower spray arc, but with greater reach. They are ideal if you want to direct the irrigation to a specific area (for example, a background, a moss wall or tall plants) or if you need the spray to reach further.

⚫ 120º (black) - more coverage, less range.

The 120º toe caps open the range, creating a wider arc to cover more surface area (leaves, branches and decoration), although spraying does not go that far as with the 80º. They are great in wide terrariums or when you are looking for a more general distribution.

🧼 Recommended maintenance if clogged (lime).

Before replacing, they can often be recovered with a simple cleaning:

1. Remove the toe cap and soak 1-2 hours in a small container with anti-scale.

2. Afterwards, clarifies very well with clean water so that no residue remains (important to prevent any toxic residue from entering the terrarium).

3. Reassemble and test the system.

If, after cleaning, the nozzle still does not spray properly or the jet is irregular, then it is advisable to changing the toe cap for a new one.

👉 Find more spare parts and components for your rain system at. https://www.kanakydesign.com/.