Vibration pump

The ULKA vibration pump for terrarium rainfall system is a spare part ULKA pumps are designed to restore or maintain the operation of spraying/fogging installations that work with this type of pump. ULKA pumps are widely used in compact pressure systems, and in terrariums they allow for efficient spraying when programmed with appropriate cycles.

Recommended use: short irrigations to extend the useful life.

This type of vibration pump for rainwater system is not designed to operate continuously for long periods of time. To avoid malfunctions, do not keep it on for more than 30-45 seconds., This would increase the risk of overheating and premature wear. Instead, the ideal is to program 10-20 second irrigations, The terrarium is equipped with a wide range of humidifiers, distributed throughout the day according to the ventilation, temperature and humidity of the environment where the terrarium is installed.

Typical examples of use (indicative):

• Tropical terrarium with good ventilation: several short cycles per day

• Dry environments or intense heating: cycles somewhat more frequent

• Terrariums already stable and bioactive: fewer but constant cycles

Tip: if you need longer sprays or a lot of nozzles, it is usually convenient to use a diaphragm pump to work with greater safety.

💧 Ideal as a spare part in rainwater systems

This ULKA terrarium pump is oriented to replacements and maintenance: it is a practical option for those who have already installed the system and need to restore its original performance without changing the entire installation.

⚠️ Important: replacement product (accessories not included)

Please note that this article is only the pump.
Does not include:

• fittings

• cable

• supports

This is intended to facilitate replacement in existing installations where you already have these elements or need to reuse the originals.

🧩 Recommendations for reliable assembly.

To improve system stability and avoid problems:

• use short cycles (10-20 s) and leave breaks between irrigations.

• check pipes and nozzles for clogging (increases workload)

• if the pump makes abnormal noises or low pressure, check filters and connections.

👉 Find spare parts and components for automation and rain systems at. https://www.kanakydesign.com/.